NFORMI HARMONE NJANI
Electrical Engineer
Douala ,Cameroon
Summary
Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals, where I can use my skills in preserving the condition and repairing the electrical installations, electrical and electronics equipment, checking their wear and tear from time to time, and maintain the efficiency of the equipment without any interruption of the work procedure.
Overview
6
6
years of professional experience
6
6
years of post-secondary education
4
4
Languages
Work History
Electrical Technician
Zani & Group, Engineeringservices LTD
Douala , Cameroon
01.2020 - Current
- Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems.
- Adhered to testing procedures while performing standard and specialized evaluations on energized and de-energized circuits.
- Installed electrical conduit and wiring for power, controls and lighting.
- Disconnected and removed motors and pumps.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
- Notified supervisor immediately about equipment problems and breakdowns.
- Installed electrical and mechanical equipment in accordance with National Electric Code.
- Tested wiring and other system parts for electrical flow and function.
- Checked supportive electrical equipment such as brackets and hangers, making repairs when necessary.
- Updated and modified components and systems to improve operation.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Determined proper methods, equipment and materials to complete cost repairs within budget.
Preparation Technician
Industrial Maintenance Supplier
Limbe , Cameroon
06.2018 - 01.2019
- Collect and print out electrical test packs,
- Request for job orders and
- Prepare documents for endorsements
- Prepare other documents and track the various activities carried out
- Keep and give out all the job orders and test packs when required by the technicians or supervisor
- Works in the field as an electrician when need be to correct and repair lighting and power circuits,machine control panels, bus bars and machine defective parts
- Worked within applicable standards, policies and regulatory guidelines to promote safe working environment.
- Handled more than 10 calls per day to address client inquiries and concerns.
- Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
- Identified issues, analyzed information and provided solutions to problems.
- Monitored company inventory to keep stock levels and databases updated.
- Worked flexible hours across night, weekend and holiday shifts.
- Demonstrated respect, friendliness and willingness to help wherever needed.
- Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
- Maintained excellent attendance record, consistently arriving to work on time.
- Used Microsoft Word and other software tools to create documents and other communications.
- Used coordination and planning skills to achieve results according to schedule.
- Received and processed stock into inventory management system.
Electrician
Top International Engineering Corp Cameroon Ltd
Buea , Cameroon
12.2016 - 06.2017
- Installation of Air conditioning facilities and heating system and maintenance.
- In case of main power failure, check the fuel and the water level of the generator and turn it on to supply power to the main lines through circuit breakers
- Help in the operation of concrete mixers and also troubleshoot when fault.
- Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
- Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
- Worked with various types of cableways, conduits and other electrical raceways.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Stored and maintained power tools and equipment for each job.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
- Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Installed ground leads and connected power cables to equipment.
- Enhanced quality control by inspecting condition of equipment and tools.
- Inspected worksites and installations to verify compliance with state safety codes.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
- Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors and wire and cable cutters to complete fast-paced work.
- Installed, maintained, repaired and tested equipment for electricity generation and utilization.
- Attain safety meetings and training sessions.
- Manage other technicians and provide training for new technicians.
Electrician
OMNI CAPITAL Cameroon
Buea , Cameroon
07.2013 - 08.2015
- Head of the electrical maintenance team.
- Wiring and maintenance in homes, offices, workshops, schools and super markets; that include maintenance of electrical equipment such as washing machines, induction motors, air conditioners, water pumps, heating appliances.
- Carryout job setting up, then plan and repair facilities as required and according to standard.
- Provide training to maintenance personals as the need arises.
- Develops appropriate and effective methods for monitoring maintenance staff activities.
- Implement appropriate methods for improved workplace safety.
- Test that the equipment/installation now function correctly.
- Confirm with the supervisor that the project has been perfectly done, then remove barriers and hand back.
Assistant Electrical Engineer (Intern)
Cameroon Development Corporation (CDC)
Tiko, Cameroon
07.2012 - 09.2012
- Panel board wiring of single and three phase induction motors in the rubber factory and in the carpentry workshops.
- Connecting low voltage cables to supply electricity in the offices and into the senior service quarters.
- Fixing of high and low pressure mercury vapor lamps on the iron pools for security lightening.
- Run and monitor diesel power generators when main power fails.
- Replacing old and faulty air conditioning facilities in the staff offices and in the senior service quarters.
- Laying of underground cables for ducting systems
- Assist the rewinding of induction motors.
- Maintained excellent attendance record, consistently arriving to work on time.
- Exceeded goals through effective task prioritization and great work ethic.
Education
Bachelor of Technology - Electrical Engineering
Higher Institute of Business Management And Techno
Buea,Cameroon 10.2014 - 06.2015
Higher National Diploma (HND) - Electrical Engineering
Higher Institute of Business Management And Techno
Buea,Cameroon 10.2011 - 06.2013
Baccalaureate - Electrical Technology
Government Technical High School (G.T.H.S) Bamenda
Bamenda,Cameroon 09.2010 - 05.2011
Probatoire - Electrical Technology
Government Technical High School Bamenda
Bamenda,Cameroon 09.2009 - 05.2010
Aptitude Certificate (CAP) - Electricity
Government Technical High School (G.T.H.S) Kumbo
Cameroon 09.2002 - 06.2005
Skills
Microsoft word
Accomplishments
- Collaborated with team of 36 in the development of Pre-commissioning and commissioning of Electrical Machines, lighting circuit and sockets phase 1 at SONARA limbe from 2018 to 2019.
- Supervised team of 36 staff members in the Pre-commissioning and commissioning of Electrical Machines, lighting circuit and sockets phase 1 at SONARA limbe.
- Supervised team of15 staff members to successfully installed and maintained machines and lighting circuits at TOP INTERNATIONAL ENGINERING CORPORATION during the construction of the Buea football stadium from 2016 to 2017.
- Managing and training of engineering interns at ZANI & GROUP ENGINEERING SERVICES LTD since 2021
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Quote
Each small task of everyday life is part of the total harmony of the universe.
Saint Thérèse de Lisieux
Timeline
Electrical Technician
Zani & Group, Engineeringservices LTD
01.2020 - Current
Preparation Technician
Industrial Maintenance Supplier
06.2018 - 01.2019
Electrician
Top International Engineering Corp Cameroon Ltd
12.2016 - 06.2017
Bachelor of Technology - Electrical Engineering
Higher Institute of Business Management And Techno
10.2014 - 06.2015
Electrician
OMNI CAPITAL Cameroon
07.2013 - 08.2015
Assistant Electrical Engineer (Intern)
Cameroon Development Corporation (CDC)
07.2012 - 09.2012
Higher National Diploma (HND) - Electrical Engineering
Higher Institute of Business Management And Techno
10.2011 - 06.2013
Baccalaureate - Electrical Technology
Government Technical High School (G.T.H.S) Bamenda
09.2010 - 05.2011
Probatoire - Electrical Technology
Government Technical High School Bamenda
09.2009 - 05.2010
Aptitude Certificate (CAP) - Electricity
Government Technical High School (G.T.H.S) Kumbo
09.2002 - 06.2005
Similar Profiles
Nazgol MoheimaniNazgol Moheimani
Research Student at SickKids, Zani LabResearch Student at SickKids, Zani Lab
NINA SPRAYNINA SPRAY
Business Development Manager at Intracoastal Construction Group and Hydrologic GroupBusiness Development Manager at Intracoastal Construction Group and Hydrologic Group
PRASHANT MISRAPRASHANT MISRA
Vice President – Account Growth & NBD at Max Mudra - JV Between The Tribes Group and DDB Mudra From Omnicom (now The Max, a Tribes Group Company)Vice President – Account Growth & NBD at Max Mudra - JV Between The Tribes Group and DDB Mudra From Omnicom (now The Max, a Tribes Group Company)
Pierre Hypolite BakounePierre Hypolite Bakoune
Reviewer at Springer JournalReviewer at Springer Journal
Hervé Junior TCHOKONTE DJEUKAMHervé Junior TCHOKONTE DJEUKAM
Chef d'entreprise at HERNITE INSTITUTE - Cours d'allemands prépaChef d'entreprise at HERNITE INSTITUTE - Cours d'allemands prépa